Monday 23 November 2026 Industry news by email, Tuesday and Thursday: sign up
Advertisement
News / Industry News Industry News

​Range Rover and Jeep Cherokee models hit by product recalls

Max Pichon · 0 comments

A number of model year 2014 and 2015 Range Rover models, as well as the model year Jeep Cherokee, have been recalled in the past week for various defects by Product Safety Recalls Australia (PSRA).

In the 2015 (KL) Jeep Cherokee​, the occupant restraint control (ORC) module software on certain vehicles may cause the unwanted deployment of a side curtain airbag and seat airbag.

These vehicles can achieve vehicle angles during off road events which may exceed the ORC module rollover calibration thresholds.

Advertisement

According to PSRA: “An unwanted airbag deployment while driving may pose an accident hazard.”

Chrysler Jeep will notify vehicle owners who can take their vehicle to a Jeep dealership whereby the ORC module will be reprogrammed with new software.

Jeep-Cherokee_2014xx

Meanwhile various Range Rover models, including the 2015 MY Range Rover and Range Rover Sport, have been recalled.

In one case the incorrectly sized blower motor wire was installed on the RHD vehicle harnesses.

“Incorrectly sized wires may overheat and pose a fire hazard,” according to the PSRA website.

Owners will be notified and instructed to take their vehicle to a Land Rover dealer who will install a correct specification ground wire. If damage is observed to the insulation of any of the surrounding wires the dealer will ensure the correct repair procedure is undertaken.

In addition, the 2015MY Range Rover, Range Rover Sport & Discovery models where found to have defects with the wheel nuts.

The wheel nuts may be made from material where the ultimate tensile strength (UTS) is lower than required specification. In this condition some wheel nuts may crack and detach from the wheel hub stud when subjected to shock loading.

“If the defect occurs, the wheels may detach, posing an accident hazard,” say the PSRA website.

Owners will be notified and instructed to take their vehicle to a Land Rover dealer who will replace wheel nuts with wheel nuts to the correct material specification. Locking wheel nuts are not affected by this concer

​Finally, a total of 96 MY2013 and MY2014 Range Rover models had the brake vacuum hose incorrectly installed. Incorrect routing of the brake vacuum hose can lead to a chafing condition, eventual rupture of the hose and complete loss of vacuum assistance in the braking system.

PSRA notes: “Vehicle braking distance may be increased, potentially causing a vehicle crash.”

Owners will be notified and instructed to take their vehicles to a Land Rover authorised repairer who will re-position the brake vacuum hose to the correct routing. The technician will also put the double ‘C’ clip in the correct orientation and position.

Max Pichon

All articles

Join the conversation